Nordex CNC systems use diagnostic codes to identify faults quickly. Below is a list of common error codes and how to resolve them.
|
Code |
Meaning |
Recommended Action |
|---|---|---|
|
E01 |
Axis overload |
Reduce feed rate and reset motor driver |
|
E02 |
Spindle not responding |
Check spindle cable or replace motor fuse |
|
E03 |
Overheating detected |
Follow the Spindle Overheating guide |
|
E04 |
Communication loss |
Inspect Ethernet cables and switch ports |
|
E05 |
Emergency stop active |
Reset the E-stop and restart the control unit |
Tip:
If the same error appears multiple times per shift, export your system logs and share them with our support team.